Friday, June 10, 2011

How to change the flat tire of your junk car

Amplify’d from junkyarddirect.com

How to change the flat tire of your junk car

It pays to be ready especially when you are on a long road trip. One of the most common problems that you will encounter is a flat tire. This is especially prevalent among old or junk cars since most of the parts are old and in need of replacement. But should you encounter a flat tire while using your junk car on the road, here are a few tips you can follow.

Before even leaving for your chosen destination, you must be fully equipped. Make sure that you always have a jack, working spare tire and a tire iron in your compartment. If not, your only recourse is to call a friend who lives nearby or ring up a tow service, which can be costly on your end.

Aside from the things earlier mentioned, you should always stock up on the other essentials such as flares and reflectors. These will help you inform others that your junk car is pulled over and that you are currently working on changing tires. This will not only contribute greatly on your safety but also protect the welfare of other cars as well, especially during nighttime. If you have companions with you on your trip, you can ask them to help direct traffic away from your stranded junk car.

Ask your companions to vacate the car first so that you can work more efficiently in changing the flat tire. Also get all the things that you will need from the trunk of your junk car so you can save time. You can now pull on your parking brake and turn on your hazard lights as well. Make sure that you are on a smooth and fairly level surface.

Get the jack and place it on a spot on your car’s frame. You can now jack up the car — just make sure that the tire does not come off the ground.

Next step is to remove any hub cap that covers the tire and lug nuts. There are usually slots that you can use to effectively remove these hub caps. Then you can loosen the lug nuts with the tire iron.

In loosening the nuts always remember this: lefty loosey, righty tighty. It means that with a counter clockwise direction, you can loosen the nuts. A clockwise direction will tighten the lug nuts. After making sure that the lug nuts are a little bit loose, you now hoist the junk vehicle with the jack until the tire is off the ground.

You can now remove the lug nuts and the tire as well. Get your spare tire and replace the old one. Make sure that it is facing the right way. Turn on the lug nuts and then gently let the car down using the jack until the tire touches the ground. Tighten the lug nuts even more with just the right amount of pressure. Put back the hub cap and cover. Make sure not to leave any of your things on the road to avoid causing injuries to any cars or pedestrians.

Read more at junkyarddirect.com
 

1 comment:

  1. Thank you for helping people get the information they need. Great stuff as usual. Keep up the great work! comign site
    tiktok downloader to download free interesring videos on tiktok

    ReplyDelete